-
Resources for the Madison Community
Madison stands with the families of Abundant Life community. This page is dedicated to connecting victims and the broader community to resources and accurate information about the tragic events that happened on December 16.
FAQs – Attached Properties, Private Well Requirements
Private Well Requirements
Town of Blooming Grove (Northern Phase) – Attached to the City of Madison, December 28, 2015Q1. How will I be notified of upcoming water related requirements?
An official notice will be mailed to you shortly after the scheduled attachment date. The notice will outline the requirements and corresponding due dates specific to your property.
Q2. What is the most important thing I need to know?
All private wells located in the City of Madison require a well operation permit which can be obtained from Madison Water Utility.
Q3. Can I keep my private well?
Yes, private domestic wells are permissible in the City of Madison; however, MGO 13.21 requires that a well operation permit must be obtained from Madison Water Utility. The following criteria must be satisfied before a well operation permit can be issued:
- The well and pump installation must satisfy the requirements of Chapter NR 812 of the Wisconsin Administrative Code.
- The well must produce bacteriologically safe water; that is, the water must be free of coliform bacteria including E. coli.
- The well must not be cross-connected to the municipal water system.
Q4. What do I do after I connect to municipal water?
Once your property is connected to municipal water, the well must be properly abandoned according to the requirements of Wisconsin Administrative Code, Chapter NR 812. The abandonment must be completed by a licensed well driller or pump installer.
Q5. What is meant by the term well abandonment?
The proper abandonment of a private well involves more than no longer using the well or simply covering the well casing (metal pipe) and ignoring it. Technically, the term well abandonment refers to the filling and sealing of a well with an approved, impermeable material such as bentonite chips, concrete, or neat cement.
Q6. What are the requirements for the proper abandonment of a well?
As of June 1, 2008, only licensed well drillers and pump installers can fill and seal wells under Wisconsin law. These licensed professionals must follow the regulations codified in Wisconsin Administrative Code, Chapter NR 812. In addition, Madison Water Utility staff must be on site for any well abandonment performed in the City of Madison. The utility maintains a courtesy list of local contractors qualified to perform this work.
Q7. What does it cost to properly abandon a private well?
The cost of a well abandonment depends on a number of factors; the primary ones being the depth of the well and whether the pump is present and needs to be pulled. A “typical” abandonment costs $800 - $1500 but may be more or less depending on the well depth; ease with which the pump can be removed; and the private contractors rates. Well drillers typically charge by the foot so deeper wells are more expensive to abandon than shallow wells.
Q8. Is any financial assistance available to help pay for the well abandonment?
The City of Madison may reimburse a property owner up to 50% of the cost, up to $1000, to abandon a well. Details are available on our Private Wells web page or by contacting Madison Water Utility at (608) 266-4654.
Financial assistance may also be available through the Department of Natural Resources (DNR). The DNR offers a limited number of income -based grants to help offset the cost to abandon an unused private wells.